Карта монтажа сигнализации лэнд крузер 200 шерхан 7

EPA Method 200.7

ALS - Columbia offers EPA Method 200.7 testing at these laboratories:

Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance.

View Actual EPA Method 200.7 (PDF File)

EPA Method 200.7:
Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Spectrometry

Except for the determination of dissolved analytes, aqueous samples are acid карта монтажа сигнализации лэнд крузер 200 шерхан 7 prior to sample processing.

For the analysis of dissolved analytes, an acidified portion of the filtrate is analyzed directly. For the determination of total recoverable analytes in aqueous samples containing particulate material as well as solid wastes, samples are subjected to acid pretreatment with nitric and hydrochloric acids and gentle refluxing prior to analysis. The method involves multi-element determination using sequential or simultaneous instruments.

The instruments measure characteristic atomic-line emission spectra by optical spectrometry. Sample solutions are nebulized and the resulting aerosol is transported to the plasma torch. Element specific emission spectra are produced by a radio-frequency inductively coupled plasma. The spectra are dispersed by a grating spectrometer and the intensities of the lines are monitored at specific wavelengths by a photosensitive device.

Photocurrents from the photosensitive device are processed and controlled by a computer system. A background correction technique is required to compensate for variable background contribution to the determination of the analytes. Background must be measured adjacent to analyte lines on samples during analysis. Various interferences are discussed and must be considered and addressed appropriately.

This method determines 31 карта монтажа сигнализации лэнд крузер 200 шерхан 7, in the dissolved fraction of aqueous samples and for the measurement of total-recoverable analytes in water, wastewater, and solid wastes.

Total-recoverable determination data for aqueous samples should be reported as total (dissolved + suspended fractions) metal data.

Methods for the Determination of Metals in Environmental Samples, Supplement 1 (EPA/600/R-94/111)

I. SPECTRAL INTERFERENCES: (1) Background emmission or stray light. (2) Spectral overlap of emissions.II. PHYSICAL INTERFERENCES: High viscosity or high particulate карта монтажа сигнализации лэнд крузер 200 шерхан 7 of sample can clog nebulizer.III.

CHEMICAL INTERFERENCES: (1) Compound formation. (2) Ionization. (3) Solute-vaporization.IV.

карта монтажа сигнализации лэнд крузер 200 шерхан 7

MEMORY INTERFERENCES: Carry-over from sample.

QC Requirements:
The minimum QC requirements consist of an initial demonstration of laboratory capability and on-going checks. The initial demonstration includes determining the linear dynamic range (LDR) for each wavelength utilized, determining the method detection limit (MDL) for each analyte, and analyzing a quality control sample (QCS).

карта монтажа сигнализации лэнд крузер 200 шерхан 7

On-going checks include periodic карта монтажа сигнализации лэнд крузер 200 шерхан 7 of laboratory reagent blanks (LRB), laboratory fortified blanks (LFB), instrument performance check solutions (IPC), calibration blanks (CB), spectral interference check solutions (SIC), and laboratory fortified matrices (LFM).

Maximum Holding Time:
6 Months



Unless otherwise noted, the analytical range extends from the laboratory-determined MDL to the upper limit of the linear dynamic range.

Data collected from an interlaboratory study conducted using EPA Method 200.7.

See: Maxfield, R. & B. Mindax. 1985. EPA Method Study 27, Method 200.7 (Trace Metals by ICP). EPA-600/S4-85/05. National Technical Information Service, Springfield, Va.

The EDLs are estimated 3-sigma instrumental detection limits that were described in "EPA Method Study 27, Method 200.7 Trace Metals by ICP" [November 1983] (Available from National Technical Information Service as PB 85-248-656).

Revision Number:
Revision 4.4, 1994

Test Description:
Metals and Trace Ele

Report Number:

Date Issued:

Instrument used for this test:

At least 38 analytes can be tested by ALS - Columbia using карта монтажа сигнализации лэнд крузер 200 шерхан 7 Method 200.7.

Please contact us for all available analytes which can be tested by EPA Method 200.7.

Examples:  8260

Examples:  Dioxin

<-- Search All Test Methods


The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.

Ask an Expert

Call 1-800-695-7222 for a Quick Quote, or reach us online.

Contact Form
Источник: http://www.caslab.com/EPA-Method-200_7/

Полезные статьи

Copyright © 2018